Service Connector dynamic binding of security model

Replies to This Discussion

Permalink Reply by Martin Wasznicky on June 4, 2018 at 7:23am

unfortunately...no

• ▶ Reply

Permalink Reply by Martin Wasznicky on June 4, 2018 at 7:24am

in 3.6 though you can set the enable/disable flag using environment variables.  so you could have 2 endpoints defined...but one would be live under one environment, while disabled in the other

• ▶ Reply

Permalink Reply by FabrizioM. on June 6, 2018 at 6:22am

Thanks Marty,

I'll  figure something out then

Fabrizio

• ▶ Reply

Permalink Reply by Christian Stærk on June 15, 2018 at 12:02am

Hi Fabrizio

You should be able to do this using our deployment framework.

I am pretty sure we did this at another client and you are using the same bits for deploying Neuron. It should be as simple as patching the XML-file for the ServiceEndpoint XML file with different values for the different environments.

Or you could use the 3.6 functionality if that is an easier path :-)

Christian

• ▶ Reply