Unable to use an Assembly from C# Code Process Step

Replies to This Discussion

Permalink Reply by Steve Kardian on January 18, 2018 at 11:28am

Terry,

Can you walk me through the steps that you are taking to achieve this as I have no problems referencing it on my end.

Steve Kardian|Solution Architect / Product Technical Specialist

Neudesic – The Trusted Technology Partner in Business Innovation

Direct: 602-419-2384 | Cell: 720-317-7129

mailto: steve.kardian@neudesic.com | www.neudesic.com

• ▶ Reply

Permalink Reply by Terry Noel on January 18, 2018 at 12:36pm

Hi Steve,

I am simply doing the following in a C# Class Process Step.

using System.IO.Compression.FileSystem; //ZipFile

Which results in the following message below the code editor window.

The type or namespace name 'FileSystem' does not exist in the namespace 'System.IO.Compression' (are you missing an assembly reference?) (14,29)

Since I did not setup this server, I was doing a bit of trouble shooting and discovered that .NET 4.5.1 had not been installed. So, I installed the .NET 4.7.1 update through Windows Update in hopes that it would resolve the reference issue. However, this update had no effect. Could this be the cause?

• ▶ Reply

Permalink Reply by Steve Kardian on January 18, 2018 at 2:36pm

Terry,

Did you add the assembly reference from the GAC to the C# code step or the process as a whole?

Steve Kardian|Solution Architect / Product Technical Specialist

Neudesic – The Trusted Technology Partner in Business Innovation

Direct: 602-419-2384 | Cell: 720-317-7129

mailto: steve.kardian@neudesic.com | www.neudesic.com

• ▶ Reply

Permalink Reply by Terry Noel on January 19, 2018 at 8:13am

Hi Steve,

With your help I was able to resolve my issue. I did not add the needed references to the process as a whole. Once I did this I was able to get what I needed. I appreciate your time and all of the help.

• ▶ Reply