Azure Service Bus Relay

Replies to This Discussion

Permalink Reply by Martin Wasznicky on May 29, 2018 at 10:25am

Ok….so if you want to use azure auth….then you end up having to use the relay binding.  And a custom behavior to configure auth.     Here’s a sample behavior I used about 6 years ago..

 

 

<endpointBehaviors>

      <behavior name="clientCredentials">

        <transportClientEndpointBehavior credentialType="SharedSecret">

          <clientCredentials>

            <sharedSecret issuerName="owner" issuerSecret="KOOTYjT35qUsxgdOWY7Gpq6E0tGP1o3+QO0vkGGinIY="/>

          </clientCredentials>

        </transportClientEndpointBehavior>

      </behavior>

</endpointBehaviors>

 

 

Just add this into the Neuron ESB explorer so that you can configure our client connector with it

• ▶ Reply

Permalink Reply by FabrizioM. on May 29, 2018 at 11:37pm

Hi Marty,

thanks for the reply.

I've used the following and now it works. I've might be due to the change in the authentication model on Azure few years ago.

Neuron is creating the relay automatically on Azure, no need to set it up in advance, otherwise it will fail.

The call is routed to Neuron correctly. Still need some tuning but it might be a way to go..

<endpointBehaviors>

   <endpointBehaviors>

         <behavior name="clientCredentials"> <transportClientEndpointBehavior> <tokenProvider>               <sharedAccessSignature keyName="keyname" key="keyvalue"/>

</tokenProvider>

</transportClientEndpointBehavior>

</behavior>

</endpointBehaviors>

Fabrizio

• ▶ Reply

Permalink Reply by FabrizioM. on June 7, 2018 at 5:26am

Hi guys,

I've set this up.

Does anybody know whether it is possible to return a json body through the WebHttpRelay.

I get an error that it's expecting an xml... or at least trying to parse an xml message

Event Info: ClientConnector_AzureServiceBusWebRelayService

Exception: The XmlReader used for the body of the message must be positioned on an element.
Parameter name: reader

Thanks

Fabrizio

• ▶ Reply

Permalink Reply by Martin Wasznicky on June 7, 2018 at 5:50am

experiment with checking the checkbox for Raw Body

• ▶ Reply

Permalink Reply by FabrizioM. on June 7, 2018 at 6:09am

Hi Marty,

thanks for the quick reply.

I've tried to set the RawBody property but it fails

Event Info: ClientConnector_AzureServiceBusWebRelayService

Exception: Text cannot be written outside the root element.

Method: VerifyWhitespace

Stack: at System.Xml.XmlBaseWriter.VerifyWhitespace(String s)
at System.Xml.XmlBaseWriter.WriteRaw(String value)
at Neuron.Esb.EsbService.RawBodyWriter.OnWriteBodyContents(XmlDictionaryWriter writer)
at System.ServiceModel.Channels.BodyWriterMessage.OnWriteBodyContents(XmlDictionaryWriter writer)
at System.ServiceModel.Channels.Message.OnGetReaderAtBodyContents()
at Microsoft.ServiceBus.RelayedHttpUtility.ConvertWebResponseToSoapResponse(Message webResponse, String responseAction)
at Microsoft.ServiceBus.RelayHttpTransportReplyChannel.RelayHttpTransportRequestContext.Reply(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.Reply(MessageRpc& rpc)

• ▶ Reply

Permalink Reply by Martin Wasznicky on June 7, 2018 at 7:00am

ok...I'll hand this over to Joe.  I'm sure he'll know the right settings..

• ▶ Reply

Permalink Reply by FabrizioM. on June 12, 2018 at 2:44am

Hi Marty / Joe,

any update on this?

Thanks

Fabrizio

• ▶ Reply

Permalink Reply by Martin Wasznicky on June 12, 2018 at 2:12pm

Joe is looking now

• ▶ Reply